|
Post by jdmgeo on Sept 20, 2018 0:57:57 GMT -4
I have tested the mirrors by powering them directly with 12vdc they work. I have a new power mirror switch and the old one which is probably still good too 8371KC000. I am almost certain the wiring harness to the mirror seems to have some issues. All the fuses are good as well fully populated 15 amp box never seen that before...
Does anyone have a diagram from the 3 wires to the mirror to that switch? I can rewire the entire thing if I knew how the switch was wired to those. I can only figure out a few wires since it has issues I can’t figure it out.
Any help would be appreciated!
Switch has 7 pins if that helps. The mirrors are not heated just 3 wires per mirror (up/down) and (left/right) with a common ground I would assume..
|
|