j10
New Member
Posts: 1
|
Post by j10 on Jul 20, 2020 12:27:30 GMT -4
I have a 89 j10 but my heads are blown and my oild and a couple other internals. I happen to come across a j12 engine but dont want to replce the whole engine block just looking to use for the parts i need does anybody know if i can do that will the pistons for the j12 fit on the crankshaft for the j10. Any advice thank you
|
|
|
|
Post by justyfied on Sept 8, 2020 16:05:18 GMT -4
I have a 89 j10 but my heads are blown and my oild and a couple other internals. I happen to come across a j12 engine but dont want to replce the whole engine block just looking to use for the parts i need does anybody know if i can do that will the pistons for the j12 fit on the crankshaft for the j10. Any advice thank you Yes the pistons will interchange onto the conrods as far as the dimensions are correct.. there might be a difference if 1 has pressed on piston wrist pins or is full floating. |
|
